The pendant is an essential gas supply medical equipment in the modern operating room of the hospital. It is mainly used for the terminal transfer of medical gases such as oxygen supply, suction, compressed air and nitrogen in the operating room. It is controlled by the motor to raise and lower the equipment platform, which is safe and reliable; the balanced design ensures the level of the equipment platform and the safety of the equipment; the drive of the motor ensures the rapid and effective operation of the equipment;

Appliance:

The essential gas supply medical equipment in the modern operating room of the hospital is mainly used for the terminal transfer of medical gases such as oxygen supply, suction, compressed air and nitrogen in the operating room.

The main advantages of the product:

The lifting and lowering of the equipment platform is controlled by the motor, which is safe and reliable; the balanced design ensures the level of the equipment platform and the safety of the equipment; the drive of the motor ensures the rapid and effective operation of the equipment; the solid design and manufacture can be cleaned with standard disinfectants. The surface of the material can completely eliminate pollution and so on.

Composition

-Appearance and structure:

The appearance is smooth and streamlined, with no splicing gaps and no exposed screws on the surface, which meets the product requirements of the special environment of the hospital.

With a bearing capacity of 220kg, it will not deform under full load for a long time.

-Cantilever

It can be rotated to increase the working coverage of the equipment and improve the use efficiency of the equipment; adjustment and use are more free and convenient. The tower head and the carrying platform can only hover on the circumference of the cantilever radius, so the single cantilever is only selected as an operating room with a small area. Rotation angle≤340°. Gas pipelines, cables, and network communication lines all pass through here.

The distance between the support point and the force point of this part is large, and the strength and deformation resistance of the part itself are very high. Drift" and tilting of the carrying platform. For this reason, for the cantilever, our company has abandoned the traditional aluminum alloy material and selected high-strength mold steel, which can ensure that there will be no deformation and wear under the long-term use of 220 kg full load. With advanced anti-corrosion treatment, it is guaranteed that there will be no rust phenomenon during the service period.

-Fixed cylinder

Connect the tower head. Its size is determined by the hospital room and the height of the ceiling decoration. Gas pipelines, cables, and network communication lines all pass through here.

The part here is the transition piece connecting the tower head, so this part not only bears the load, but also bears the key part of flexible rotation, and the resistance to deformation is also very high, so we use the same material and the same process as the cantilever.

-Tower head

Rotatable for installation of gas connections and gas pressure gauges, as well as instrument power sockets.

Due to the convenience of modeling, this part is made of 08F steel plate, which is a special material for sheet metal.

-IV pole

Infusion bags (bottles) or infusion pumps can be hung.

-Gas terminal

Provide oxygen, suction, compressed air and other gas terminals.

-Power outlet

Up to 8 power sockets are available, or network and telephone interfaces are available upon request.

-Connecting column

Attachment to the carrier platform.

Since the platform will be adjusted as needed, the clamping screw will not damage the antirust function, and the number of platforms can be increased as required, so medical grade stainless steel pipes are used.

-Bearing platform

The standard configuration is two layers, which can be increased. Independent rotation angle ≤340°, bearing load: ≤220kg.

-Features

No splice gaps, no exposed grooves, no exposed screws. The product has a large bearing weight, and is not deformed under full load for a long time. It is the only product of the same kind that has no brakes and does not drift, and has strong maintenance-free capabilities.

Main technical parameters and configuration

1. Three power sockets: 8 220V±15V, 50Hz

2. Mechanical damping brake

3. Instrument carrying platform: 2

4. Drawer: 1

5. Oxygen and suction gas terminals: 2 each

6. Compressed air terminal: 1

7. Independent rotation angle of each joint: ≤340°

8. Total length of moving arm: 800mm

9. Bearing load: ≤220㎏

Type

In the industry, it is mainly divided into fixed type, electric lifting and rotating type, single cantilever type, double cantilever type, and medical functional column type.

Installation method:

The column of the medical pendant is composed of sections, and the pendant is also very low at the beginning. Whenever the height is to be increased, a special device is used to pull one of the "joints" apart (the principle is: the lower end of the device is fixed to the lower standard section, the upper end is fixed to the upper standard section, and then the upper and lower ends can be supported by hydraulic devices) , and then put a standard segment that forms a column into the open space, then remove the device, and put the upper part down to fix it. This is how the tall pendant grows section by section.